Made from stainless steel inside and out. The double wall construction provides the best draft for optimal stove performance.
You will need enough 3" double wall flue pipe to go from where the top of the stove will be to one foot past the highest point of the roof.
24” long with 22 1/2" of usable flue pipe (1.5" lost on the connection)
provides 22.5" of usable flue pipe / 1.8 Feet
provides 46.25" of usable flue pipe / 3.875 Feet
provides 69" of usable flue pipe / 5.75 Feet
provides 91.5" of usable flue pipe / 7.62 feet
provides 114" of usable flue pipe / 9.5 feet
The inside pipe goes inside the flue collar on the stove, the outer pipe goes outside the flue collar. The pipes connect as they should so there is no creosote that will leak out (male end facing down)
Outside diameter is 3 1/4"
The inner pipe's diameter is 2 7/8"
Our flue pipe require a 3" clearance to combustibles as it goes up the wall, with flue flashing the entire length.
Our wall mounts comes with adjustable flue shields. ( 37" of flue flashing when fully extended) If more flue shields are required, we offer 30" length of flue shield extensions (CB-2015-30-SS or CB-2215-30-SS). This must be installed behind the entire length of flue when installing on or near a wall.
We suggest to exit straight up and out the roof. For that reason, we do not have elbows for our flue pipes. We also do provide caps, fittings and flashing's to exit and these items can be found here
Fix pipes together permanently with self-tapping screws at each joint.
Pellet stove pipe should never be used on our stoves.
Cleaning Instructions found Here