• CB-1008 black mini wood stove with a visible firebox and controls, 'Certified' and indicating it meets UL 1482-2022 and ULC S627-2023 standards.
  • CB-1008 black mini wood stove with a visible firebox and controls, 'Certified' and indicating it meets UL 1482-2022 and ULC S627-2023 standards. held in arms
  • CB-1008 brass mini wood stove with a visible firebox and controls, 'Certified' and indicating it meets UL 1482-2022 and ULC S627-2023 standards.
  • CB-1008 black mini wood stove with a visible firebox and controls, 'Certified' and indicating it meets UL 1482-2022 and ULC S627-2023 standards.
  • CB-1008 black mini wood stove with a visible firebox and controls, 'Certified' and indicating it meets UL 1482-2022 and ULC S627-2023 standards.
  • CB-1008 black mini wood stove side view with a visible firebox and controls, 'Certified' and indicating it meets UL 1482-2022 and ULC S627-2023 standards.
  • CB-1008 black mini wood stove showcasing the CB-7300 water heater with a visible firebox and controls, 'Certified' and indicating it meets UL 1482-2022 and ULC S627-2023 standards.
1 7

Cubic Mini Wood Stoves

CB-1008 Cub Mini Wood Stove

CB-1008 Cub Mini Wood Stove

$749.00 CAD
$998.67 CAD $749.00 CAD
Sale Sold out
Shipping calculated at checkout.
The CB-3060 connector cone must be used to connect to a 6" double wall residential chimney system (Duravent)Our 3" pipe is not independently certified. As a result, installers must treat it as a single-wall pipe, which requires a minimum clearance of 18 inches from the wall.
Trim color

The Cub Mini Wood Stove CB-1008 is safety-certified to UL 1482-2022 (U.S.) and CAN/ULC-S627-2023 (Canada). Safety certification is separate from environmental emissions certification and mobile-home certification. This stove is not approved for residential installation and does not have mobile-home certification.

Speak with your insurer before purchasing or installing. Insurance requirements for recreational installations differ from residential requirements and vary by policy. An insurer’s acceptance does not replace the installation manual or applicable requirements.

The manual states that the stove must not be installed in a transportable building. It does not define that term or explicitly confirm its application to vans, buses or boats. Confirm suitability for your particular installation with the relevant authority and insurer. Follow the manual for your exact model; do not apply non-certified setup guidance to this certified model.

Features

 

  • Easy to install and easy to operate!
  • Secondary combustion system.
  • Removes humidity from the cabin.
  • The rail is easily removable.

Dimensions/Weight

 

  • Approximately 27 lb
  • Measures only 11" (Wide) x 12" (High) x 10.5" (Depth) ( 27.94 cm x 30.48 cm x 26.67 cm ).
  • If you remove the rail, you have a cooking area of 5" ( 12.7 cm ) from the flue to the edge of the plate and 11" ( 27.94 cm ) side to side.
  • Measurements for the interior firebox: 6" (Depth) x 7.375" (Wide) x 6.5" (Tall) (15.24 cm x 18.42 cm x 18.733 cm - 16.51 cm).

Specifics

 

  • Requires a horizontal clearance of 14" ( 35.56 cm ) on the sides and 16" ( 40.64 cm) at the front of the room heater, without shielding and a vertical clearance of 40" ( 101.6 cm ). 
  • Utilize the bottom heat shield to safeguard the underlying surface when placed onto a certified hearth pad ( manual page 10)
  • For certified installations, maintain at least 18 inches from the outside surface of the 3-inch pipe to combustible surfaces. This is a pipe clearance, not a distance from the mount or pipe centerline. Shielding does not reduce this requirement in Canada. In the U.S., retain 18 inches unless the applicable requirements and authority expressly permit a reduction. Position the mount to achieve the required pipe clearance.
  • The stove needs a complete flue system comprising of 3"(7.62 cm) flue pipe, with a standard 6" double wall chimney system certified to UL103 HT(U.S.A) or ULC-S629(Canada). Specifically designed to connect to a Duravent chimney system.
  • The connector cone (CB-3060) is used to transition from our 3" to the 6" double wall chimney system NOT INCLUDED.

Material

 

  • 3/16" laser cut steel top plate.
  • 1/8" laser cut steel body.
  • 1/2" thick vermiculate firebrick insulation.
  • 3/16" thick self cleaning robax glass.
  • Brass plated coil handles.

 

View full details