CB-2000-BR GRIZZLY Cubic Mini Wood Stove Brass
CB-2000-BR GRIZZLY Cubic Mini Wood Stove Brass
Non Certified
Features
- Easy to install and easy to operate!
- Eco-friendly
- Produces very little smoke due to its secondary combustion system!
- Much safer than a diesel or propane cook stove!
- Removes humidity from the cabin.
- The rail is easily removable.
Dimensions/Weight
- 40lb
- Measures only 13" (Wide) x 15" (High) x 12" (Depth) ( 33.02 cm x 38.1 cm x 30.48 cm ).
- If you remove the rail you have a cooking area of 6 1/2" ( 16.51 cm ) from the flue to the edge of the plate and 13" ( 33.02 cm ) side to side.
- Measurements for the interior firebox: 6.75" (Depth) x 7.375" (Wide) x 7.5" (Tall) (17.145 cm x 18.733 cm x 19.05 cm).
Specifics
- Requires a horizontal clearance of 14" ( 35.56 cm ) on the sides and 16" ( 40.64 cm) at the front of the room heater, without shielding and a vertical clearance of 40" ( 101.6 cm ).
-
Underside of stove must be shielded at all times.
- Clearances reduced to 3" ( 7.62 cm ) when using proper mounting and shielding.
- The stove needs a complete flue system comprising of 3"(7.62 cm) flue pipe, 5"(12.7 cm) insulated pipe and exit kit NOT INCLUDED
Material
- 3/16" laser cut steel top plate.
- 1/8" laser cut steel body.
- 1/2" thick vermiculate firebrick insulation.
- 3/16" thick self cleaning robax glass.
- Brass plated coil handles.
Perfect stove for our shop here at Homestead Brand. Keeps our 12 x 14 space warm. Great quality all around.
Thank you for your review of the CB-2000-BL GRIZZLY Cubic Mini Wood Stove. We are so glad to hear that it is keeping your shop warm and that you are pleased with the quality. We hope it continues to serve you well in the years to come. Happy heating!
I had a difficult time with self-tapping screws, but I am not a handyman. Stepp learning curve for me through the installation process. I received quite an education. Missing one length of 24" for roof O was able to use a length of 5" galvanized pipe I had on hand. It seems to work fine. I'm not sure if the 3" and 5" are both needed for that last one or 2 lengths above the roof. Single wall 5" would seem to be sufficient.
Hello, thank you for your review. Sorry to hear of the issue with the screws. But glad you love your stove! The 3' pipe indeed must go through the 5' pipe. And the 5' pipe should have its insulation present. The pipe is the engine of the stove and if done incorrectly it will not allow the stove to work like it should. Again, thank youf ro review, and if you need anything at all, just let us know. cubicminiwoodstoves@gmail.com
Thank you
I very satisfied from start to finish. From the quality of the workmanship, the helpfulness of the staff in addressing my questions to the ease of installation in a complex scenario. I created a YouTube video outlining the steps I took for a unique installation that brings both the accessory pull out tray and the outside are intake together to work for my needs.
https://youtu.be/f1TI-VFq34E
Hi Dan, thank you very much for your great review. Very glad we were able to help when needed. And a great video to boot.
Thanks again.
Heat my 350sq no problem
Grizzly